Advertisement
(7) Leakage Rate: under the stable state of the vacuum value, make a judgment on
the possibility of leakage of the current system, which is represented by 0-100;
0 means the uncertain of the leakage status. The larger the number, the
possibility of leakage is larger.
(8) Device Name: modify the device name, support up to 10 characters and numbers,
click OK to confirm.
(9) Vacuum Unit: select vacuum unit, inHg , Torr, mbar, mTorr, Pa, micron, kPa.
(10) Record Switch: vacuum pump data recording switch, closed by default.
(11) Interval Time: select logging interval, 1S, 5S, 10S, 30S, 1Min, 2 Min, 5 Min.
(12) Read historical data: read the value saved by the vacuum pump while recording.
Before reading the data, it will remind whether to delete the data after reading.
9. Setting
(1) Click Settings to set parameters and alarm values of vacuum pump.
-18-
Advertisement
