Begin To Use; Function Introduction - Haier HF-248 Usage Manual

Begin to use

1.Starting of the appliance
For the initial use of the freezer, it is required
to start it at least 3hours in advance of putting
food.
Switching on the appliance. When plugged in,
the appliance shall automatically be set to
position 3, and quick cooling to position 0, green
power light I shall be turned on, and at the same
time, red alarming light L shall be turned on
together with buzzing sound. Press the buzzer
can stop the buzzing sound. Green power light I
indicates whether the appliance is switched on
or not.
When the temperature of the appliance has been
lowered to required limit, green alarming light
L shall be automatically be turned off.
2.Appliance working method
Suggestion
No matter how ambient temperature changes, it can
maintain optimum refrigeration effect without any
other adjustment so long as you have selected the
artificial intelligence, giving you much convenience.
You can set the appliance by selecting one of the two modes according to
necessity.
(1) Artificial intelligence mode: if no other special demand, we recommend you to use the
artificial intelligence. By pressing the artificial intelligence key to turn its indicating light on,
then the appliance shall automatically work.
(2) Manual adjusting mode: you can adjust and set the freezer temperature position according
to food storage necessity (such as for quick freezing). (See the following "temperature setting
and adjustment" in the later section of "function introduction").
Ｉ Ｌ
Starting of the appliance
！
6

Function introduction

Introduction of main panel
J K L
I
D
B C
A
A. Power switch
B. Unlock button
C. Automatic mode
D. Buzzer cancel
E. Cold storage temperature increase
F. Cold storage temperature decrease
G. Freezer storage temperature increase
H. Freezer storage temperature decrease
E+F Temperature setting (after unlocking)
Power control
After switching on the appliance, green power light I on the above of power switch A shall be
turned on. In order to prevent misoperation, it is necessary to press key A for 3 seconds in
order to stop its power supply, then the indicating lights and display windows shall all be
turned off, it shall stop cooling. If pressing the power key A again, the appliance shall resume
working, and all indicating lights and windows shall all be turned on again.
Locking and release
After switching on, the appliance shall automatically enter a locking state, light J shall be
turned off; by pressing key B, the locking shall be released, and light J shall be turned on.
Artificial intelligence setting
Under the artificial intelligence state, the appliance shall automatically adjust temperature
control position according to the ambient temperature changes, without manual control. Press
key C, and light K shall be turned on to enter the artificial intelligence state. Then quick
freezing position is on 0 and it is impossible to set quick cooling. Also the temperature position
is impossible to be set. To stop the state, press key C continuously for 3 seconds. At this
moment, light K shall be turned off.
M
E Ｏ
G
TEMP
℃
F
SF
N
F
H
G+H Quick freezing button (unlocked
mode)
G+H Cold storage temperature indicator
button (locked mode)
I Power indicator
J Lock indicator
K. Automatic mode indicator
L. Over-temp warning indicator
M. Temperature indicator
N. Quick freezing indicator
O. Error indicator
7