Safety Of Others - Black & Decker GSL200 Original Instructions Manual

If the tool stalls, immediately switch it
u
off.
After use, place the blade sheath
u
supplied over the blades. Store the
tool, making sure that the blade is not
exposed.
Always ensure that all guards are fitted
u
when using the tool. Never attempt to
use an incomplete tool or a tool with
unauthorised modifications.
Never allow children to use the tool.
u
Be aware of falling debris when cutting
u
the higher slides of a hedge.
Additional power tool safety
warnings
@
Warning! Additional safety
warnings for shears
Never allow people unfamiliar with
u
these instructions or children to use
the machine. Local regulations can
restrict the age of the operator.
Keep in mind that the operator or user
u
is responsible for accidents or hazards
occurring to other people or their
property.
Never operate the machine while
u
people, especially children, or pets are
nearby.
Use the machine only in daylight or
u
good artificial light.
Always ensure that the ventilation
u
openings are kept clear of debris.
Use only the
u
manufacturer's recommended
replacement parts and accessories.
Inspect and maintain the machine
u
regularly. Have the machine repaired
only by an authorized repairer.

Safety of others

This appliance can be used by children
u
aged from 8 years and above and
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way andunderstand
the hazards involved.
Children shall not play with the
u
appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN 60745 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
ENGLISH
9