XM1240S AT Commands Reference Manual
5.5
CALLING NUMBER REPORT (CLIP)
The CLIP (calling party number) can be reported together with the "CONNECTED" or
the "RING" messages. To enable this, ATW1 or ATW2 must be selected (see
description at 3.3.14). The CLIP can be reported also by issuing the command
AT$O. This way, only the CLIP number is reported. If the ISDN Modem is used at the
public network, then the full call number of the remote site (including area code) is
reported.
Example:
ATW1
OK
RING 0448903322
ATA
CONNECTED (V.120) 0448903322
5.6
ISDN ERROR CAUSE REPORT
The ISDN error causes can be reported together with the "RELEASED" or "NO
CARRIER" message. If ATW1 is selected, the error causes are reported in decimal
form. If ATW2 is selected, the error causes are reported in text format. The coding
scheme is as per ETSI definition.
Example 1:
ATW1
OK
ATD0449121234
RELEASED 17
Example 2:
ATW2
OK
ATD0449121234
RELEASED USER BUSY
No. XM1240S-A00-106
All manuals and user guides at all-guides.com
xmodus swiss GmbH
send to modem
received from modem
received from modem
send to modem
received from modem
send to modem
received from modem
send to modem
received from modem
send to modem
received from modem
send to modem
received from modem
36 / 46