1. Manuals
  2. Brands
  3. XMODUS Manuals
  4. Modem
  5. XM1630S
  6. Software reference manual

XMODUS XM1630S Software Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
XM1630S Software Reference Manual
LAN Modem
XM1630S
Software Reference Manual
Version 104
Released 4. January 2010
No. XM1630S-A00-104
xmodus swiss GmbH
1 / 32

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XM1630S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for XMODUS XM1630S

Summary of Contents for XMODUS XM1630S

  • Page 1 XM1630S Software Reference Manual LAN Modem XM1630S Software Reference Manual Version 104 Released 4. January 2010 No. XM1630S-A00-104 xmodus swiss GmbH 1 / 32...
  • Page 2 No license is granted by implication or otherwise under any patent rights of xmodus other than for circuitry embodied in xmodus products. Xmodus swiss reserves the right to change circuitry at any time without notice.

  • Page 3: Table Of Contents

    XM1630S Software Reference Manual TABLE OF CONTENTS INTRODUCTION..................... 4 OVERVIEW ....................4 PRODUCT DESCRIPTION ................4 MANAGEMENT AND CONFIGURATION ............5 Login with Web Browser................5 Login with Telnet Client ................5 Login with TTY ..................... 6 General information..................6 WEB BASED CONFIGURATION..............

  • Page 4: Introduction

    XM1630S Software Reference Manual INTRODUCTION OVERVIEW This manual describes the commands and the configuration for the following xmodus swiss GmbH Socket Modem families: AL6000SS LAN Socket Modem (5V Version) AL6000S-3V LAN Socket Modem (3V Version) The description applies to all these LAN-modems without any differences between product families noted.

  • Page 5: Management And Configuration

    XM1630S Software Reference Manual MANAGEMENT AND CONFIGURATION The modem provides 3 different ways for configuration and management. Using Browser Configuration Management Using Using Telnet Login with Web Browser When using the web browser to configure your LAN-modem for the first time, use the default IP address of the modem: 192.168.1.3...

  • Page 6: Login With Tty

    XM1630S Software Reference Manual Login with TTY When using TTY to configure your LAN-modem, you must configure the serial port to the default serial configuration of the module. 115200 bps, 8-bit, no parity, 1 stop bit  No authentication needed for TTY configuration.

  • Page 7: Web Based Configuration

    XM1630S Software Reference Manual WEB BASED CONFIGURATION The AL6000S LAN-modem consists of a HTTP Web server, which allows configuration and monitoring through any common web browser. When using your web browser to configure your LAN-modem for the first time, use the default IP address of the modem: 192.168.1.3...

  • Page 8: Web Based Lan Configuration

    XM1630S Software Reference Manual Web based LAN configuration The LAN Configuration Screen allows configuration of all the LAN specific parameters such as IP address, subnet mask, gateway IP address, Ethernet speed and DHCP server. LAN configuration screen: Important: The LAN configuration menu contains a validation procedure, which prevents the storing of incorrect configuration data.

  • Page 9: Web Based Serial Configuration

    XM1630S Software Reference Manual Web based serial configuration The serial configuration screen provides all the settings for the serial interface and the serial communication modes. SERIAL configuration screen: 3.2.1 Serial Port configuration:  Serial Port parameters: setting of baud rate, parity, data-bits, stop-bits and flow- control.
  • Page 10 XM1630S Software Reference Manual 3.2.3 Serial/TCP Communication settings:  Dial-in: The dial-in radio button enables TCP access from remote side to the LAN modem (incoming calls) and enables the modules Telnet data Server. The dial-in port specifies the port address of the Telnet data server (8000 default).

  • Page 11: Web Based Statistics

    XM1630S Software Reference Manual Web based statistics The statistics screen provides all the information regarding the packet (frame) oriented traffic on the Ethernet port. These statistics can be helpful to trace back specific processes. Statistics screen: No. XM1630S-A00-104 xmodus swiss GmbH...

  • Page 12: Web Based I/O Configuration

    XM1630S Software Reference Manual Web based I/O configuration The I/O configuration screen provides all the settings to configure the I/O and ADC ports plus the LED output lines. It allows read and write operations on predefined hardware ports. 3.4.1 Configure LED outputs: ...

  • Page 13: Web Based Administration

    XM1630S Software Reference Manual Web based administration The administration screen provides the possibility to change the user name and the password of your module. Furthermore you will be able to configure the FTP, TELNET and HTTP servers. Important: Please pay attention that changes on this page are only accepted if the present password has been entered in the “Verify your present password”...

  • Page 14: Command Line Interface

    XM1630S Software Reference Manual COMMAND LINE INTERFACE Syntax and procedures The T.50 International Alphabet 5 (IA5) is used in this document. Only the low-order seven bits of each character are significant to the modem; any eight or higher-order bit(s), if present, are ignored for the purpose of identifying commands and parameters.

  • Page 15: Summary Of Commands

    XM1630S Software Reference Manual Summary of commands LAN CONFIGURATION CONFIGURE INPUT/OUTPUT set_dhcp <enable/disable> DHCP set_user Set output mode of I/O ports set_ip_add Set IP address get_user Get output mode of I/O ports set_ip_mask Set IP mask set_ddr Set port type [i,o] of I/O ports...

  • Page 16: Help Screens

    XM1630S Software Reference Manual Help screens  Display Main menu 4.3.1 help<cr> AL6000S Main menu =================== Configure LAN interface Configure serial interface Configure serial/TCP communication Go to I/O menu Go to administration menu Configure security Go to overview/statistics menu AT commands...
  • Page 17 XM1630S Software Reference Manual  Display Serial/TCP configuration menu 4.3.4 3<cr> Serial/TCP =================== go to main menu set_raw_socket <enable/disable> TCP socket is raw, not Telnet set_iac_rx <enable/disable> IAC rx filtering set_iac_tx <enable/disable> IAC tx stuffing set_socket_tout Set Telnet session inactivity timeout (min) enable/disable>...
  • Page 18 XM1630S Software Reference Manual  Display Security menu 4.3.7 6<cr> Security menu =================== go to main menu set_login <enable/disable> Terminal menu login set_ftp <enable/disable> FTP server set_telnet <enable/disable> Telnet service set_web <enable/disable> WEB server set_web_auth <enable/disable> WEB server authentication set_telnet_port Set telnet listener port number...

  • Page 19: Description Of Commands

    XM1630S Software Reference Manual Description of commands 4.4.1 LAN configuration commands set_dhcp: set_dhcp enable = enables DHCP Protocol set_dhcp disable = disables DHCP Protocol Note: Before enable the DHCP protocol set IP Address to: 0.0.0.0 set_ip_add: set_ip_add xxx.xxx.xxx.xxx = sets the IP address Example: set_ip_add 192.168.0.1 <cr>...
  • Page 20 XM1630S Software Reference Manual validate: validate = validates actual configuration Note: The LAN configuration menu contains a validation procedure, which prevents the storing of incorrect configuration data. Saving of new settings cause an immediate reset and must be validated within a period of 3 minutes. After this timeout with no validation, the module returns to the previous configuration.
  • Page 21 XM1630S Software Reference Manual set_par: set_par EVEN = sets parity to EVEN set_par ODD = sets parity to ODD set_par NONE = sets No parity Example: set_par NONE<cr> set_flow: set_flow XON = sets flow control to XON/XOFF set_flow RTS = sets flow control to RTS/CTS...
  • Page 22 XM1630S Software Reference Manual 4.4.3 Serial/TCP configuration commands set_raw_socket: set_raw_socket enable = Data transmission mode is raw set_raw_socket disable = Data transmission mode is Telnet Note: set_dial_in and set_dialin_port configurations should be issued prior to this command Example: set_dial_in enable<cr>...
  • Page 23 XM1630S Software Reference Manual set_esc: set_esc enable = Enable escape to command mode set_esc disable = Disable escape to command mode This monitor flag will enable or disable the scanning of the escape sequence. set_str: set_str xxx = Defines the escape string The Telnet Server scans for this escape sequence and transfers the control to the command parser.
  • Page 24 XM1630S Software Reference Manual set_auto: set_auto enable = Enables the automatic dial-out function set_auto disable = Disables the automatic dial-out function Note: The triggering of the automatic dial-out procedure is accomplished with either the DTR line or with data sent to the modem. This should be defined with the set_auto_hw command.
  • Page 25 XM1630S Software Reference Manual set_ddr: set_ddr [4,5] [i/o] Set port type of Ports 4,5 Ports: 4,5 Type: i = input / o = output Example: set_ddr 4 o<cr> / Port 4 is defined as output get_ddr: get_ddr [4,5] = Read type of port 4,5 Example: get_ddr 4<cr>...
  • Page 26 XM1630S Software Reference Manual 4.4.5 Administration commands set_pass: set_pass = Defines user name and password. Example: set_pass<cr> / Answer of module: Please enter new user name (4..8 characters) : ADMIN <cr> Please enter new password (4..8 characters) : PASSWORD<cr> Please confirm the new password: PASSWORD<cr>...
  • Page 27 XM1630S Software Reference Manual set_ftp: set_ftp enable = enable FTP Server set_ftp disable = disable FTP Server Note: This command selects if the FTP server of the module is accessible from the remote side. The FTP server enables modification of the web pages. Disable it to protect against unwanted modifications.
  • Page 28 XM1630S Software Reference Manual set_trusted_ip: set_trusted_ip xxx.xxx.xxx.xxx = Defines the trusted IP Address Example: set_trusted_ip 192.168.0.39 None: If “Trusted IP address” is set non-zero, only the specified IP address (trusted address) is allowed to login on to the module and take configuration and monitoring.

  • Page 29: Firmware Update

    XM1630S Software Reference Manual FIRMWARE UPDATE The linear flash memory up-loader allows flash memory to be upgraded with revised modem firmware. This process transfers (uploads) the upgraded modem firmware (data) from the host computer to the LAN-modem using the serial RS232 interface.

  • Page 30: Applications

    XM1630S Software Reference Manual APPLICATIONS Setting up a Telnet Configuration Session Ensure that the TELNET service is enabled, its port number is known and the IP address of the modem is known (default 192.168.1.3 port 23). Configure password protection and trusted IP address as required. (These changes can always be performed over the local serial interface).

  • Page 31: Automatic Dial-Out

    XM1630S Software Reference Manual The default settings can be overwritten as required by extending the ATD command (example): ATD R 192.168.1.37 1499 / Connect to RAW TCP socket at 192.168.0.37, on port 1499 If the TCP socket defines IAC filtering in one particular direction, this can be configured using the set_iac_rx and set_iac_tx command as appropriate.

  • Page 32: Dial-In

    XM1630S Software Reference Manual Example: set_raw_socket disable<cr> / Ensure TCP socket is Telnet set_dialout_ip 192.168.1.47<cr> / Defines address for automatic dial-out function. set_dialout_port 8000<cr> / Defines port number 8000 set_auto_hw enable<cr> / Automatic dial-out triggering with DTR line. set_auto enable<cr>...

This manual is also suitable for:

Xm1530s

Table of Contents