i-PRO WV-QJB501 Operating Instructions

Operating Instructions
Included Installation Instructions
Base Bracket
WV-QJB501
Model No.
● Before attempting to connect or install this product, please read these instructions
carefully and save this manual for future use.
● The external appearance and other parts shown in this manual may differ from the
actual product within the scope that will not interfere with normal use due to
improvement of the product.
● For other languages of this manual, refer to our manual website (https://
i-pro.com/global/en/surveillance/training-support/documentation-database-
list).
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage
resulting from failures arising out of improper installation or operation
inconsistent with this documentation.
For U.S. and Canada:
i-PRO Americas Inc.
For Europe and other countries:
i-PRO EMEA B.V.
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Caution:
● Before attempting to connect or operate this product, please read these
instructions carefully.
Notice:
● This product is not suitable for use in locations where children are likely to be
present.
● Do not install this product in locations where ordinary persons can easily reach.
● For information about screws and other parts required for installation, refer to the
corresponding section of this document.
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause
fire, electric shock, injury, or damage to the product.
Be sure to consult the dealer.
When using this product, also read the "Precautions" described in the
operating instructions for the camera to be attached.
Precaution
Mount the camera onto the ceiling or wall using this bracket.
Use this bracket when conduits are used for wiring, or when there is no
space available for wiring in the ceiling or the wall.
For the latest information about the supported cameras, refer to our
support website (https://i-pro.com/global/en/surveillance/training_support/
support/technical_information/ <Control No.:C501>).
Ambient operating temperature : –50 °C to +60 °C {–58 °F to +140 °F}
Dimensions
Mass
Finish
 I n order to prevent injury, the product must be securely mounted to a wall or
ceiling according to the Installation Guide of the camera.
 M ake sure to remove this product if it will no longer be used.
Operating Instructions (this document) ....................................................................1 pc.
Fixing screws for attachment plate (M4 × 8 mm {5/16 inches}) ............................ 5 pcs.
Template B (for the base bracket) ..................................................................... 1 sheet
Refer to the Installation Guide of the camera for details of how to
install this bracket.
For Installation Guide of the camera, refer to the following manual
website (https://i-pro.com/global/en/surveillance/training-support/
documentation-database-list).
avs0222-0
Printed in China
Preface
Specifications
: ø164 mm × 41.4 mm (H)
{ø6-15/32 inches × 1-5/8 inches (H)}
: Approx. 450 g {0.99 lbs}
: Aluminum die cast Black
Precautions for installation
Standard Accessories
Installation
(of them, 1 for spare)