Servicing The Inlet Valves - Stiga HPS 110 Troubleshooting Manual

Turbo and Rotary Nozzle
After having checked the above, test the machine with the new accessory; if the problem
persists, proceed as follows
9.2

Servicing the Inlet Valves

The following exploded view and pictures relate to the HPS 345 R model, but the information is valid
for all models.
HPS 345 R
58 – Valves + seals kit
To perform the checks and the disassembles illustrated below, it is necessary to start by removing the
MOTOR/PUMP Unit.
To avoid damage and to facilitate subsequent operations, before starting the disassembly of the
Pump Head, please remove the suction pipe and the TSS.
11 / 17
Maintenance Guide HPC