Advertisement
CRADLE LIFTER
To install the Cradle Lifter, follow these instructions
and refer to the illustration on page 3.
1) Line up the Cradle Lifter next to your phone
(leave the Velcro
with the listening portion of your telephone
handset. Make sure that the Cradle Lifter is not
lifting your handset while you make adjustments,
since lifting the handset is what activates the
phone.
2) Next, see how high the Cradle Lifter needs to be
raised to ensure that you get a good dial tone.
Once you have the Lifter at a good position, attach
a piece of Velcro to the side of your phone.
Remove the Velcro from the Cradle Lifter and
attach it to the phone.
3) If the Cradle Lifter is having difficulty supporting
your phone, attach the optional Brace Unit to the
side of your Cradle Lifter. The Brace Unit is
slotted on both ends to allow a full range of
adjustment.
4) On some phones you may need to put an
additional small piece of Velcro under the phone
so that the Cradle Lifter will perform optimally.
2
®
on). The lift rod should be flush
Advertisement
