Connection Options; Remote Control - Haier HL22K2 Owner's Manual

Introduction

Connection Options

Back panel connections
ATN IN
P r
Antenna
Connect cable or antenna signals to the TV,
1
Input either directly or through your cable box.
Headphone
Headphone audio output terminal.
2
jack
Connect the audio L/R cables from the video
AUDIO In
3
signal source to these jacks.
Connect the S-Video cable from an external
S-VIDEO In
4
signal source to this jacks.
Connect the audio L/R cables from the video
AUDIO In
5
signal source to these jacks.
Connect the video signal from a video device to
VIDEO In
6
this jack.

Remote Control

Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two (AAA) alkaline batteries in the compartment,
(plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
EN-5 Haier LCD HDTV
R-AUDIO-L S-VIDEO IN
R-AUDIO -L
P b Y
COMPONENT IN
AV IN USB PC IN
VIDEO
7 USB input
8 PC Video In
9 PC Audio In
0 HDMI In
Component
A
Input
PC AUDIO IN HDMI IN
Connect a USB flash drive to view MPEG2 videos,
JPEG images or listen to MP3 songs.
Connect a video cable from a computer to this
jack.
Connect the audio L/R cables from a computer to
this jack.
Connect a HDMI device to receive digital audio and
uncompressed digital video.
Connect a component video device to these jacks.