Table of Contents
Advertisement
- To prevent damage to circuitry, never short-circuit positive (+) and
negative (-) speaker wires.
- Be sure to connect only positive (white) wires to positive (+) terminals
and negative (blue) wires to negative (-) terminals.
Incorrect connection can damage the speakers.
Positioning the speakers
How you set up your speakers can affect the bass and the sound field.
Note the following points:
- Place the speakers on flat secure bases.
- Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with a thick curtains.
- Left and right speakers are interchangeable, but front and surround
speakers are not.
Setup example
Place the front, center and surround speakers at approximately the same distance from the seating
position.
The angles in the diagram are approximate.
Used only supplied speakers
- Using other speakers can damage the unit, and sound quality will be
negatively affected.
- Set the speakers up on an even surface to prevent them from falling.
Take care proper precautions to prevent the speakers from falling if you
cannot see them up on an even surface.
Main unit
Note
- Keep your speakers at least 10 mm (
/
") away from the system for
13
32
16
Advertisement
Table of Contents
