Page 4
LED – motor status LED – Z-Wave network status The device is part of the Z-Wave network. LED is off the device is assigned to the controller's memory. Overload occurs. Force > 20kg. Triple flash Such situation also takes place when shutting the window for its tight closure.
AMZ Z-Wave ZWMP AMZ Z-Wave ZWS230 ZWS12 VMZ Z-Wave ZWP10 ZW S12 ZW S230 15VDC 230VAC ~ 50Hz Power voltage Rated power 0,72A 0,26A Rated current 0,03A Standby current up to 40m Operating range (in the open area) Z-Wave Radio protocol...