Advertisement
Quick Links
ITEM #4595
PARKING GARAGE
ASSEMBLY INSTRUCTIONS
2008 Melissa & Doug, LLC
All Rights Reserved
www.MelissaAndDoug.com
We care about your comments.
Please call us! 1-800-284-3948
WARNING:
!
CHOKING HAZARD -
Small parts.
Not for children under 3 years.
CAUTION:
!
Adult assembly required.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Melissa & Doug PARKING GARAGE
Summary of Contents for Melissa & Doug PARKING GARAGE
- Page 1 PARKING GARAGE ASSEMBLY INSTRUCTIONS WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years. CAUTION: Adult assembly required. We care about your comments. 2008 Melissa & Doug, LLC Please call us! 1-800-284-3948 ITEM #4595 All Rights Reserved www.MelissaAndDoug.com...
- Page 2 PARKING GARAGE PARTS BASE RAMP BASE 1 piece 1 piece 3 ELEVATOR 1 piece 2nd FLOOR 1 piece 1st FLOOR 1 piece 3rd FLOOR 1 piece ATTENDANT'S BOOTH CAR WASH 1 piece 1 piece GAS PUMP Screws and Bolts shown actual size...
- Page 3 PARKING GARAGE STEP 1 STEP 2 Attach one connector (A) to the Base Ramp (2) with Attach the Base Ramp to the one Small Screw from Base (1) with a Small Bolt from bag (B) Bag (F). Do not tighten completely at this time.
- Page 4 PARKING GARAGE STEP 4 Attach the Elevator (3) shown here using two Large Bolts (C) from under the Base. STEP 5 Slide the 1st Floor (4) into the bottom grooves on the Elevator. Make sure it is all the way in and...
- Page 5 PARKING GARAGE STEP 6 Fasten the 1st Floor with two Upper Pillars (E) as shown here by turning the screw end through the floor and into the Lower Pillars. Align and start both pillars through the floor before tightening completely.
- Page 6 PARKING GARAGE STEP 9 Slide the 3rd Floor (6) into the elevator shown here. STEP 10 Fasten the 3rd Floor using two Large Bolts (C) through the floor and into the Pillars. Align and start both Bolts through the floor before...
- Page 7 PARKING GARAGE STEP 11 Attach two Connectors (A) using two Small Screws (B) to one of the Floor Ramps (7). STEP 12 Place the Floor Ramp with the Connectors between the 2nd and 3rd Floors and attach using two Small Screws (B) NOTE: The "countersink"...
- Page 8 PARKING GARAGE STEP 13 Attach the last two connectors (A) to another Floor Ramp (7) using two Small Screws (B) STEP 14 Attach this Floor Ramp between the 1st and 2nd Floors using two Small Screws (B) NOTE: The "countersink" (angled hole) should be on the top side where the screw goes in first.
- Page 9 PARKING GARAGE STEP 15 Fit the Attendant's Booth (8) to the base using 2 Large Screws (F). Your Parking Garage and all its accessories are now ready for play!
Need help?
Do you have a question about the PARKING GARAGE and is the answer not in the manual?
Questions and answers