Download Print this page
Össur REBOUND DIABETIC WALKER Fittings Manual

Össur REBOUND DIABETIC WALKER Fittings Manual

Hide thumbs Also See for REBOUND DIABETIC WALKER:

Advertisement

Quick Links

REBOUND
®
DIABETIC
WALKER
Removing
Instructions
1.
Before undoing the straps,
press the small "-" button
on the front of the walker
to deflate the air bladder
2.
If a compliance strap has been
used this should be cut with
a pair of scissors to remove.
However this should only be
done in case of emergency or as
directed by your clinician. Undo
the 3 straps (in any order).
3.
Remove the front shell
and open the liner.
4.
While seated, remove your
leg from the liner and
walker simultaneously.
TIP: If you cannot easily remove
your leg after following steps 1,
2 and 3, try removing excess air
in the air bladder. The air bladder
is located inside the walker shell
and the best way to deflate it is to
stroke downwards on it with your
hand, whilst pressing the "-" button
at the same time.
Important: Always inspect your
foot and leg for pressure marks or
wounds.
Contact a medical professional
immediately if you experience any
discomfort or pain or if you are
concerned about your foot.

Advertisement

loading
Need help?

Need help?

Do you have a question about the REBOUND DIABETIC WALKER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Össur REBOUND DIABETIC WALKER

  • Page 1 REBOUND TIP: If you cannot easily remove ® Before undoing the straps, press the small “-“ button your leg after following steps 1, DIABETIC on the front of the walker 2 and 3, try removing excess air WALKER to deflate the air bladder in the air bladder.
  • Page 2: Care & Cleaning

    Care / Cleaning Instructions It is easy to clean your Rebound Diabetic Walker by following these guidelines: Insole Walker Frame Liner • • • Remove the insole from the liner. To clean the walker frame, use To machine wash the liner, use a damp cloth, mild soap and 30 °C warm or cold setting and...
  • Page 3 REBOUND ® DIABETIC WALKER Fitting Guide...
  • Page 4 REBOUND Apply sock, ensuring there are Use the holes at the back of ® no wrinkles. Unfasten the straps, the walker to confirm that the DIABETIC remove the front shell and open ankle is centered and that the WALKER the liner. The insole should be heel is not pressed against placed inside the liner with the the back of the walker.