Table of Contents
Advertisement
Player – Rear (Figure 2)
(34) Control Start A Jack
Connect the supplied mini‐plug from the Cue Jack on the rear of your unit to the Control Out Jack of a compatible American Audio® or American
DJ® mixer. This will enable the "Q‐Start" function. This feature is only available on American Audio® or American DJ® "Q" series mixers.
(35) Microphone Jack
This jack is used to connect a microphone to the mixer. Connect your microphone via this 1/4 inch (6.3mm) jack. The volume output level for this
microphone will be controlled by the by the Microphone Volume Control (6).
(36) Audio Outputs Player 1
These jacks send a left and right analog mono output signal. Use these jacks to send standard audio to a mixer or receiver. The red colored jack
represents the right channel output and white jack represents the left channels output.
©American Audio®
www.americanaudio.us www.americanaudio.eu
DP‐2™ User Manual Page 31
Advertisement
Table of Contents
