Haier HLF11P User Manual page 10

Various button initial status for "Normal program"
Cycle Signal
Wrinkle Care
Cycles
Nixie display
Temp
Dryness Level
Timed/Cycles
2. Press "Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-program Selection" button
until corresponding indicator turns on.
Customer
Heavy Duty
Towels/Cotton
Initial status of various buttons when setting "Auto-program Selection".
Cycles Normal Heavy Duty Towels/Cotton Delicate Casual Bulky Items
Wrinkle Care To be used together with reserve function, off if reserve is disabled
Cycle Signal
Delay Start
Timed/ Cycles
Temp
Dryness Level
Notes: If "Customer" is selected, various buttons will indicate previous conditions
set by the user.
"Customer" function is a program designed to facilitate user's operation. It can
memorize programs defined by user himself and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customer" status, then set "Cycles" to
Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button
or after half a minute, the program defined by user himself will be stored and
will be directly displayed upon next use.
Notes: Pressing "Dryness Level" button will be inactive during use of "Customer"
function.
Softer
Off
Normal
Indicate current program remaining time
High
More Dry
Auto-program
Normal
Cycles
Indicate current selected program remaining time
Bulky Items
Casual
Delicate
Softer
Auto Dry
High
More Dry
9