Yale 3000 Series Installation Instructions Manual

3000 Series
Regular Arm
Installation
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Left Hand Door - LH
Right Hand Reverse - RHR
Parallel Arm
Installation
See Pages
Left Hand Door - LH
Right Hand Reverse - RHR
These door closers should NOT be installed on the exposed side (weather side) of exterior doors.
Backcheck Valve
Latch Valve
Closer Body
Sweep Valve
Main Arm
289A Parallel
Closer Arm
Arm Bracket
Tri-Style
!
See Page 2
"DL" suffix (Delayed Action) is an optional
feature.
NOTE: For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Always adjust spring power before
adjusting control.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°. Greater closing
3 & 4
times may be required for elderly or
handicapped.
Metal
#7
Power Adjustment Shaft
Cover Clips
Cover Screws
Regular Arm/Top
Optional 3500M
Jamb Shoe
Series Metal Cover
Connecting Rod
Forearm
Screw
Installation Instructions
80-9303-2206-010 (10-07)
Non Handed Door Closer
A n I n c o r r e c t l y i n s t a l l e d o r
improperly adjusted door closer can
cause property damage or personal
injury. These installation instructions
should be followed to avoid the
possibility of misapplication or
misadjustment.
Wood
3/16"
* Pilot Hole
1/4-20
Required
Cover Screw
Cover
Insert
Cover Screw
Standoffs
NOTE: Architectural Cover
Cover Screws CAN NOT be used for doors
swinging over 120 using
Optional 3500MA Series
parallel mount
Architectural Metal Cover
Non Hold Open Models
Sized
(Sizes 2,3,4,5,6)
3100
3300
3500
Regular Arm
Installation
See Page 2
Right Hand Door - RH
Left Hand Reverse - LHR
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Parallel Arm
Installation
See Pages
3 & 4
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
for Wood drill 7/32
Machine Screws
#7 Drill, 1/4-20 Tap
Insert Cutouts
Standoff
Standard 3500P Series
Insert Cutouts
Full Cover
Cover
Insert
Standoff
° Optional 3500A Series
Architectural Plastic Cover
Adjustable
(Sizes 1 thru 6)
3301
3501
Right Hand Door - RH
Left Hand Reverse - LHR
(Optional)
Sleeve Nut and Bolt
Drill 9/32 thru from Closer Side
3/8 Drill other side
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other Side
Pinion Cap (1639)
Standard 3300 Series Narrow Cover
Screw Pack