Directions For Use; Unfold The Zappbug Heater; Connect The Zappbug Thermal Unit - ZappBug Heater User Manual

Hide thumbs Also See for Heater:
Table of Contents

Advertisement

Use & Operation

1. Unfold the ZappBug Heater

Note:
It is normal for one side of the ZappBug Heater to appear
warped. This allows the ZappBug Heater to easily fold and does
not affect functionality. If warping appears excessive, shake the
ZappBug Heater to ensure that each side panel is fully extended.

2. Connect the ZappBug Thermal Unit

Locate Ventilation Tube
Note: It is normal for small gaps to appear between the textured side of the
ZappBug thermal unit and the ventilation tube. Bed bugs will not escape
through these gaps if the ZappBug thermal unit is on. Bed bugs experience
thermal shock and are not capable of moving toward the ZappBug thermal
unit. Always ensure that the ZappBug thermal unit is on when placing potentially
infested items inside the ZappBug Heater.
Safety Note: Always maintain a minimum clearance of 6 inches around the
ZappBug thermal unit when operating.
Place Base of ZappBug
Thermal Unit in Tube
Stretch Tube Around
ZappBug Thermal Unit
(Observe "Do Not Cover"
markings)
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Heater and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents