Advertisement
Power ON
The ALTITRACK has been powered OFF prior to shipping from our factory. To turn the
power ON, press and hold any button until the unit beeps, then release the button.
The ALTITRACK runs a self-test and moves the pointer from "6" to zero.
The unit displays "Logbook screen # 1". (Main information)" on the LCD.
The ALTITRACK uses very little battery power and does not need to be switched OFF.
However, we recommend that you switch OFF the ALTITRACK when traveling on
commercial flights, when driving in mountanious areas and when the jump season is
over. To power OFF the ALTITRACK, see page 22.
16
Example
No data stored
NOTE: If no button has been pressed within 5 minutes the ALTITRACK switches to the
"Main Display" (showing Time, Temperature inside instrument and Altitude).
Road Map
It is recommended that you familiarize yourself with the ALTITRACK ROAD MAP
which is a very helpful tool when using the ALTITRACK for the first time.
Customising the ALTITRACK Settings
The ALTITRACK can be customised to your personal settings. Your settings will be
stored and recalled also after replacing batteries. When you first get the ALTITRACK,
we recommend you to go through the SETUP Selector to customise the ALTITRACK.
Example
17
Advertisement
