Table of Contents
Advertisement
The appliance does
not come on after
pressing the START/
STOP button.
When the sear buttons
are pressed, "SEAR"
flashes on the display
then the sear function
goes off .
Thermoprobe error
The thermoprobe is
too hot or the elec-
tronic control has de-
tected a temperature
probe malfunction
The display does not
switch from timer
mode to temperature
of the probe when the
connector is inserted
in the appliance
34
Both
temperature
knobs are in the "●"
position and the up-
per and lower display
show OFF. Turn the
temperature
knob
to the desired tem-
perature, then press
START/STOP.
The sear function
is available once in
every 30 minutes of
the cooking cycle. If
you try to perform a
second sear cycle be-
fore 30 minutes have
elapsed, the operation
will be refused.
Wait 30 minutes be-
fore starting a new
sear cycle.
Unplug the thermo-
probe and cool it be-
fore plugging again. If
the ERR word still ap-
pear the thermoprobe
needs to be replaced.
Contact
De'Longhi
Customer Service.
Temperature
probe
or connector needs to
be replaced. Contact
De'Longhi Customer
Service.
Advertisement
Table of Contents
