Product Operation; Basic Operation - Pro Vision BODYCAM BC-300 User Manual

4. Product Operation

4.1 Basic Operation

Press and hold the Power button for 3 seconds to turn the camera ON .
The camera can also be turned ON by pressing the Record button on
either side of the camera for 2 seconds; this will turn the camera ON and
automatically begin recording . When turned on with the Power button the
green power status LED will turn ON and the camera will vibrate, indicating
the camera is ON . Then, a "beep" will sound, indicating that the camera
is ready to begin recording and the image below will appear on the LCD
screen .
If the camera is connecting to Wi-Fi and a button is selected, a message
stating "Wi-Fi booting, please wait ." will appear . Once the camera has
connected to Wi-Fi, all camera buttons will be functional .
NOTES:
Pre-record is turned OFF by default.
The camera automatically turns ON when connected to a device via USB.
The camera automatically turns OFF when data has finished transferring.
The internal 32GB memory is non-removable. The ability to delete files, change
camera settings, and view previously recorded videos, audio files, and
captured photos is based on rights given to the camera from the administrator.
The possible camera privileges are as follows:
• Administrator Privileges: Able to change camera settings, and view
camera files.
• Supervisor Privileges: Able to view camera files.
• User Privileges: Unable to change camera settings, or view camera files.
5