4.8 Protecting & Deleting Photos, Videos, and Audio Files
Depending on the privileges set by the administrator, the user may or may
not be able to access files on the camera . Files cannot be deleted from the
camera without using 1 or 2 software programs . When using the BODYCAM
or SecuraMax
automatically removed from the camera once the upload process is complete .
If the SecuraMax
deleted, tagged, and shared via the user's SecuraMax
on the account privileges .
4.9 Standby Mode
When in Preview mode, if the camera is idle for the specified "standby
time," which is set in the system settings, the camera will automatically
enter a power-saving standby mode . Pressing the Power button for less
than 1 second will return the camera to normal operation .
4.10 LCD Screen ON/OFF
The LCD screen can be turned OFF at any time by pressing the Power
button for less than 1 second . The LCD screen can then be turned ON at
any time by pressing the Power button again .
4.11 Camera Reboot
To manually reboot the camera if it "locks up," use a pen to press and hold
the Reboot button located underneath the Audio button until the camera
turns OFF . Press and hold the Power button to turn the camera back ON .
NOTE:
When using the Reboot button to turn OFF the camera, all of the camera
settings will remain the same. They will NOT reset to their default setting.
Upload Utilities, files on the camera's micro SD card are
™
Upload Utility was used, the files can then be protected,
™
19
account depending
™
®