Advertisement
1. Plug the unit into a polarized wall outlet.
2. Select and attach the desired massage head.
3. To turn the unit on, press the POWER button located above
the handle.
4. For steady massage, press the MASSAGE button on the con-
trol panel. To increase or decrease the intensity level, press
the up or down arrows.
5. For a programmed massage, press the PROGRAM button
until the desired program is lit. To select the interval level,
press the INTERVAL button until desired interval is lit.
Note: When using the red heat-massage heads, press the HEAT
button to activate heat in any massage mode. Do not use the
heat function with any other massage head.
6. Gently apply massage heads to the area you wish to treat and
slowly move in a circular motion. Treat for a short period of
time and then move to another area. Never treat the same
area for longer than three minutes.
Note: A massage session longer than 15 minutes is not recom-
mended.
7. When treatment is complete, turn the unit off and unplug it
from the outlet. Store it in a cool, dry place.
Quick Start
Advertisement
