Haier HSU-18RC03/R2 User Manual
Haier HSU-18RC03/R2 User Manual

Haier HSU-18RC03/R2 User Manual

Haier hsu-18rc03/r2: user manual
Hide thumbs Also See for HSU-18RC03/R2:

Advertisement

Quick Links

Cautions
The machine is adaptive in following situation
I. Applicable ambient temperature range:
Indoor
Cooling
Outdoor
Indoor
Heating
Outdoor
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service ag
or a similar qualified person. The type of connecting wire is H05RN-F or H07RN-F
3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.
4. The distance between the indoor unit and the floor should be more than 2m.
5. The wiring method should be in line with the local wiring standard.
6. After installation, the power plug should be easily reached.
7. The waste battery should be disposed properly.
8. The appliance is not intended to use by young children or infirm persons without supervi
9.Young children should be supervised ensure that they do not play with the appliance.
10.The appliance must be installed on strong enough supporter.
11.The wiring diagram is attached inside the machine.
Maximum: D.B / W.B
Minimum: D.B / W.B
Maximum: D.B
Minimum: D.B
Maximum: D.B
Minimum: D.B
Maximum: D.B / W.B
Minimum: D.B / W.B
o
o
32
C/23
C
o
o
18
C/14
C
o
o
43
C/26
C
o
18
C
o
27
C
o
15
C
o
o
24
C/18
C
o
o
-7
C/-8
C

Advertisement

Table of Contents
loading

Summary of Contents for Haier HSU-18RC03/R2

  • Page 1 Cautions The machine is adaptive in following situation I. Applicable ambient temperature range: Indoor Cooling Outdoor Indoor Heating Outdoor 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service ag or a similar qualified person. The type of connecting wire is H05RN-F or H07RN-F 3.
  • Page 2: Parts And Functions

    Parts and Functions...
  • Page 3: Operation

    Parts and Functions Operation ON/OFF TEMP MODE SWING SLEEP LOCK Clock set When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: Press CLOCK button, "AM" or "PM" flashes. Press to set correct time.
  • Page 4 LOCK BRIEF INTRODUCTION TO HEALTH OPERATION The anion generator in the air conditioner can generate a lot of anion to effectively balance the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally clean the air in the room.
  • Page 5 When sudden power failure happens during unit operation in power failure resume mode, if the air conditioner is not desired for use in a long period, please shut off the power sup in case that the unit automatically resume operation when power is re-supplied, or press ON/OFF to turn off the unit when power resumes.
  • Page 6 Operation Auto run, Fan operation (1) Unit start Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up. (2) Select operation mode Press MODE button. For each press, operation mode changes as follows: AUTO COOL...
  • Page 7: Cool,Heat And Dry Operation

    Operation COOL,HEAT and DRY operation Recommendations: (1) Unit start Press ON/OFF button, unit starts. Previous operation status appears on display. Power indicator on indoor unit lights up. (2) Select operation mode Press MODE button. For each press, operation mode changes as follows: AUTO COOL Unit will run in operation mode displayed on LCD.
  • Page 8 Operation...
  • Page 9: Timer Operation

    Operation TIMER Operation Set Clock correctly before starting Timer operation You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night. TIMER ON/OFF (1)After unit start, select your desired operation mode.
  • Page 10 Operation TIMER ON-OFF (1)After unit start, select your desired operation mode Operation mode will be displayed on LCD. Power indicator on indoor unit lights up. (2) Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: TIMER ON TIMER OFF Select TIMER ON-OFF.
  • Page 11 Operation...
  • Page 12 Operation Comfortable SLEEP Before going to bed at night, you can simply press the SLEEP button and unit will bring you a sound sleep in selected mode. In COOL mode One hour after SLEEP mode starts, temp. will become 1 C higher than temp.
  • Page 13 Maintenance...
  • Page 14 Maintenance...
  • Page 15 Maintenance...

This manual is also suitable for:

Hsu-18rc03

Table of Contents