English - IKEA LAKTRA Quick Manual

English

QUICK GUIDE
ON/OFF button
Timer (30 minutes)
Dimmer
Preset mode for recommended light
colour and brightness during daytime.
Preset mode for recommended light
colour and brightness during night-time.
Preset mode for recommended light
colour and brightness for backlight. The
backlight raises the ambient light in a
room and reduces the strain on your eyes.
Preset mode for recommended light
colour and brightness for night light.
4
User manual
1. To turn on the work lamp and start to use a
preset mode, you can press the desired button
directly, without using the ON/OFF button.
However, to turn off the work lamp manually,
you must press the ON/OFF button.
2. To change the brightness when using a preset
mode, simply drag your finger over the dimmer
to the right or left (does not apply for night light
mode).
3. You can also press the ON/OFF button to turn
the work lamp on and then use the dimmer to
adjust the brightness.
4. The work lamp has a memory function, which
means that light colour and brightness are the
same the next time you turn it on.
5. If you want to set a 30-minute timer without
needing to keep an eye on a clock you can press
the timer button. It will then slowly flash three
times to indicate that the countdown has started
or ended.
6. If you want the work lamp to automatically
turn off when the night light mode is active,
press the timer button and it will turn off in 30
minutes.