Kärcher K 1 Entry Operator's Manual page 10

1. Screw the supplied female garden
hose quick connector on to the end
of your garden hose.
1
Garden hose
1
Female garden hose quick connec-
2
tor
2. Insert the male garden hose quick
connector that is on the device into
the female garden hose quick con-
nector until you hear a "Click", which
indicates that the garden hose in se-
cured properly to the device.
10
3. Connect the water supply hose to
the water supply.
2
4. Turn the water tap on completely.
5. Unlock the lever on the trigger
gun.
6. Pull on the lever of the trigger gun to
make sure that water is flowing free-
ly and that all air has been purged
from the device.
Note
The device is designed with self-prim-
ing function. The device can get the
water by putting the water supply hose
into the water bucket.
Note
We recommend that you test the GFCI
as part of your startup procedure each
time you use the device, see chapter
GFCI INSTRUCTIONS.
WARNING
Do not use if above test fails.
English