M2 Maintenance Interval Operations - freightliner CENTURY CLASS 2011 Maintenance Manual

General Information
The M2 Maintenance Interval Operations tables list
all maintenance operations that are to be performed
at the M2 maintenance interval. Maintenance opera-
tion numbers are reference numbers used to help
Maintenance
Operation Number
00–06 Perform All M1 Operations
01–01 Engine Noise Panel Inspection (noise emission control)
01–02 Engine Drive Belt Inspection
01–04 Engine-Support Fasteners Check (noise emission control)
09–01 Air Cleaner Element Inspection and Replacement
15–01 Alternator, Battery, and Starter Check
20–01 Pressure Relief Cap Check
25–02 Clutch Release Cross-Shaft Lubrication
25–03 Sleeve Assembly Bronze Bushing Lubrication
25–04 Meritor Clutch Release Bearing Lubrication
26–02 Allison Transmission Fluid and Filter Change
26–03 Manual Transmission Air Filter/Regulator Check, Cleaning, or Replacement
26–04 Transmission Fluid Level Inspection
32–01 Suspension Inspection
32–03 Suspension U-Bolt Torque Check
33–01 Knuckle Pin Lubrication, Meritor Axles
33–02 Tie Rod Inspection
33–03 Tie Rod Lubrication, Meritor Axles
33–07 Basic Inspection, Meritor Unitized Wheel Ends
33–08 End-Play Check, Meritor Unitized Wheel Ends
33–09 Kingpin Lubrication, Detroit
33–10 Tie Rod Lubrication, Detroit
35–02 Axle Breather and Axle Lubricant Level Inspection
40–01 Wheel Nut and Rim Nut Check
42–01 Air Brake System Valve Inspection
42–03 Air Dryer Inspection
42–04 Alcohol Evaporator Cleaning and Inspection
42–08 Meritor Slack Adjuster Lubrication
46–01 Drag Link Inspection
46–03 Power Steering Fluid Level Inspection
46–04 Power Steering Gear Lubrication
46–05 Drag Link Lubrication
46–06 Rack and Pinion Steering Gear Inspection
Century Class Trucks Maintenance Manual, August 2017
M2 Maintenance Interval Operations: 00–07
M2 Maintenance Interval Operations for Service Schedules I, II, and III
™ Axles
™
Axles
you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
M1 maintenance interval operations at the M2 main-
tenance interval.
*
†
‡
‡
00
Check
00/13