Download Print this page
One for All ZAPPER User Manual & Code Book
Hide thumbs Also See for ZAPPER:

Advertisement

Quick Links

Features and Functions
URC-6520
700930
Key
UK
LED
R
Universal Remote
TV
U S E R G U I D E & C O D E B O O K
R e t a i n F o r F u t u r e R e f e r e n c e
MAGIC
Power
TV
SAT
Programme+
Volume
-
Volume +
The ZAPPER needs 2 new "AAA/LRO3" alkaline batteries.
1
Mute/Scan
Programme
-
2
3
Important notes:
- In order to avoid having to reprogram your ZAPPER after you remove
the batteries, you will need to insert new batteries within 5 minutes.
- Also, it is best that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a
Contents
label on which to write your set-up codes after your ZAPPER is
set up for your shading devices. Please write down your codes
for easy, future reference.
ABOUT YOUR ZAPPER
Features and Functions
Front Page
INSTALLING THE BATTERIES
Front Page
Direct Set-Up
SETTING UP THE ZAPPER
Front Page
To set up the ZAPPER for your Television and Satellite Receiver (or Cable
Converter) follow the instructions below. To set up your Television:
Direct Set-Up
Front Page
Search Method
Front Page
1
Turn on your Television.
ADVANCED OPERATION
2
Controlling Colour & Brightness
Front Page
Scan
Front Page
TROUBLE-SHOOTING
3
Helpful Hints
Front Page
Consumer Help-Line
Front Page
4
SET-UP CODES
Quick Set-Up
Back Page
5
Codes
Front- / Back Page
About Your ZAPPER
Thank you for purchasing the ZAPPER universal remote control
(URC-6520). Your ZAPPER package contains:
The ZAPPER Remote Control
The ZAPPER User Guide & Code Book
The User Guide & Code Book explains in simple steps how to set up
6
and operate your new universal remote control. You may need this
guide again in the future, so please be sure to keep it.
7
Turn your device back on and try all the remote's functions to ensure
Your ZAPPER needs 2 new "AAA/LRO3" batteries.
they are working properly. If the functions do not work properly,
repeat steps 1-6 using another code listed under your brand.
Your ZAPPER is designed to let you use one remote to operate your
Important notes:
Television and Satellite Receiver (or Cable Converter). The illustration
- To set up your Satellite Receiver or Cable Converter, follow the same
on the left and the chart below describe the features and functions
instructions above, only press the SAT key during step 3.
of the ZAPPER universal remote control.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, follow steps 1-6 with each
code listed for your brand.
- If none of the codes listed for your brand operate your device, follow
the Search Method described in the next section. The Search Method can
be used even if your brand is not listed at all.
- Remember, to control your device after you have programmed it with
the ZAPPER, you must press the device key first (TV or SAT).
- Write the codes for your TV and SAT in the boxes provided below
and inside the battery compartment for easy future reference.
TV Code
SAT/Cable Code
Searching for Your Code
If your Television or Satellite does not respond to the ZAPPER after
Function
trying all the codes listed for your brand, try searching for your
code. To search for your TV code:
LED
1
Turn on your TV.
The LED (Light Emitting Diode) flashes red to show
the remote is working.
2
TV
MAGIC
The MAGIC key is used to set up your ZAPPER and to
3
access special features.
Power
4
The Power key turns your devices both on and off.
Device Keys
5
SAT
The TV and SAT keys select the home entertainment
device to be controlled. Pressing the TV key allows the
remote to control the functions of your Television.
After pressing SAT, you can operate your Satellite
Receiver or Cable Converter.
6
Mute
The Mute key operates the same function it did on
your orginal remote control. It is also used to activate
the Scan feature (see Scan).
7
The ZAPPER should now be ready to operate your device.
Turn your device back on and try all the remote's functions to
Volume+/ - , Programme +/ -
ensure they are working properly. If some of the ZAPPER'S
The Volume and Programme keys control the two most
commands are not operating correctly, try the search method
frequently used functions of your devices. They
again, you may be using the wrong code.
operate just as those on your original remote control.
These keys are also used to program the ZAPPER for
Important notes:
your devices and to control the Colour and Brightness
- When you want to control your device, press the device key first (TV or SAT).
- To search for the code for your Satellite Receiver or Cable Converter, fol-
settings of your television (Advanced Operation).
low the same instructions above, only press the SAT key during step 2.
- During step 5, you may have to press these keys many times (up to
Installing The Batteries
150!), so be patient. Remember, you must aim the ZAPPER at your
device the entire time you are searching for your code.
Code Blink Out
Remove the battery cover from the back of
the ZAPPER by pressing down on the tab.
After you have used the Search Method, you can find out which
code the ZAPPER responded to by blinking back the code. It's handy
to know your Television, Satellite Receiver or Cable Converter code
for future reference. Remember, you can only blink back your code
Match the batteries to the +/- marks inside
after the ZAPPER is operating your device.
the battery case, then insert the batteries.
To blink out your TV code:
1
TV
Press the battery cover back into place.
2
3
4
5
Setting Up The ZAPPER
6
7
8
Find your Television code in the Set-Up Code
section (see reverse). Codes are listed by brand
name. The most popular codes are listed first.
Press and release the TV key to select the device.
TV
Important note: To blink out the code for your Satellite Receiver or
Cable Converter, follow the same instructions above, only press the SAT
Then press and hold the MAGIC key until the
key during step 1.
light blinks twice (the light will blink once then
twice).
Enter your 5-digit code according to the
chart below. The red light will blink twice.
Controlling Colour & Brightness
Volume +
=
1
Depending on the functions of your original remote control, the
Volume -
=
2
ZAPPER can operate the colour and brightness settings of your
Television.
Programme +
=
3
Colour up =
Programme -
=
4
Colour down =
Now, aim the ZAPPER at your Television and press
POWER. If your Television switches off, your
ZAPPER should be ready to operate your device.
Brightness up =
Brightness down =
Scan
Your ZAPPER comes with a special Scan function which lets you
"scan" through every programme available on your TV, Satellite or
Cable Box.
For example, to scan the programmes on your TV:
1
TV
The ZAPPER will send the command to advance
through all the programmes available on your
Television stopping at each programme for
about three seconds. Remember, you must aim
the ZAPPER at your device the entire time you
are using scan.
Press the TV key on the ZAPPER.
When you find a programme you would like to
2
TV
watch, simply press the device key you are
using (TV, SAT) to stop the Scan feature.
Then, press and hold the MAGIC key until
In this case press the TV key.
the light blinks twice (the light will blink
once then twice).
Important notes:
- To use Scan with your Satellite or Cable Box, follow the same instruc-
x3
tions above, only press the SAT key during step 1.
Next, press the Programme(-) key three times.
- Scan may not function with devices that did not have a programme +/-
key on the original remote.
Next, alternate between Programme(-) and
POWER until your Television turns off. You
Trouble-Shooting
may have to press these keys many times, so be
patient. Remember, you must aim the ZAPPER
at your device the entire time you are
Helpful Hints
searching for your code.
Problem:
When your device turns off, press and release
MAGIC. Don't forget, press MAGIC as soon as
your device turns off.
Red light does not blink
when you press a key?
The ONE FOR ALL does not
respond after pressing a
key?
The ONE FOR ALL does not
operate your device?
Your brand is not listed in
the ONE FOR ALL code section?
The ONE FOR ALL is not
performing commands
properly?
Your TV switches to
programme 1 when you
press the power key before
switching off OR you must
press Power twice to switch
on your TV?
Press the TV key on the ZAPPER.
You cannot reach channel 10
Then, press and hold the MAGIC key until the
and above on your TV or
light blinks twice (the light will blink once
Satellite.
then twice).
Next, press Programme(-), Programme(-),
Programme(+).
For the first digit of your 5-digit code, press
Volume + (
) and count the red blinks.
For the second digit, press Volume - (
) and
count the red blinks.
For the third digit, press Programme(+) and
count the red blinks.
For the fourth digit, press Programme(-) and
count the red blinks.
For the fifth digit, press MUTE and count the
red blinks.
Now you have your 5-digit code. Write your
code in the boxes provided previously for easy,
future reference.
Advanced Operation
Press
then hold
Press
then hold
Press
then hold
Press
then hold
Aim the ZAPPER at your TV. Press the TV key.
Press and release MAGIC then press the MUTE
key.
Quick Set-Up
TV + MAGIC* + CODE** = Ready
(To set up your TV)
SAT + MAGIC* + CODE** = Ready
(To set up your Satellite or Cable Box)
*
Hold MAGIC until the red light blinks twice.
(The light will blink once then twice)
** The red light will blink twice
Set-Up Codes
Use the Programme and Volume keys to enter your code:
Volume +
=
Solution:
Volume -
=
Replace batteries with 2 new
"AAA/LR03" alkaline batteries
Programme +
=
Make sure you are using new
batteries and are aiming the ONE
Programme -
=
FOR ALL at your device.
A) Try all the codes listed for your
brand. B) Try the search method.
Programme + = 3
Try the search method.
You may be using the wrong code.
Volume - = 2
Try Direct Set-Up again trying each
code listed under your brand or
start the search method over again
to locate the proper code.
Press TV, then press MAGIC until
the light blinks twice.
Programme - = 4
Then press:
(Programme-)
(Programme+)
(Programme-)
If your original remote did not
have channel +/- keys, the Zapper
may not operate this function.
(Example: To enter the Sony TV code 11133, you would press
Volume+, Volume+, Volume+, Programme+, Programme+)
If your device does not respond to the ZAPPER after you have tried
all the codes listed for your brand, try the Search Method described
on the reverse side.
Make sure you write your correct 5 digit codes in the boxes
provided inside the battery compartment and in the boxes
provided on the reverse side.
Set-Up Codes (5 digits)
4210059 Arthur
Televisions
4210060 ASA
4210991 A.R. Systems 11322 22311
4210062 Asberg
4211306 Accent
11322
4211095 Asora
4210005 Acura
11132
4210070 Asuka
4210010 Admiral
12224 12242 23313
14222 21131
4210072 Atlantic
4210012 Adyson
14232 14231
4211080 Agashi
14231
4210074 Atori
4210014 Agazi
21131
4210075 Auchan
4210015 AGB
31121
4210080 Audiosonic
4210997 Agef
12224
4210017 Aiko
14231 11132 11322
22414 11314
4210081 Audioton
12131 22332 13444
4210084 Ausind
21131 14232
4210085 Autovox
4210018 Aim
11322 21213
4210020 Akai
22332 14211 22414
11322 13444
4211156 Awa
11314 11132 12131
14233 13314
4211081 Ayomi
31121 31341 32122
4211098 AYR
24311 14232
4210091 Baird
32424 14231 21131
24111
4210021 Akiba
14233 21233 24124
11322
4210093 Bang
4210023 Akura
14233 22324 21233
21221 11132
4210094 Barco
23241 21131 11322
4210097 Basic Line
24342
4211267 Alaron
14231
4210024 Alba
14233 14334 11132
4210098 Bastide
23313 22413
4210099 Baur
22314 22414 11322
14231 14424
23344 13314 11412
32122 24324
11321 32114
4211082 Bazin
4210026 Alcyon
12141
4210103 Beko
4210029 Allorgan
14143 21323 14232
4211272 Bell & Howell 13233
4210032 Allstar
11322
4210105 Beon
4210041 Amplivision 14232 23211 22111
4210106 Best
22413
4210107 Bestar
4210042 Amstrad
13412 11132 31121
4210108 Binatone
21131 14233
4210110 Black Star
22414 22333 23241
4210111 Blacktron
11322
4210112 Blackway
4211094 Anam
11322 11132 12121
4210113 Blaupunkt
4211268 Anam
National
11322
4210044 Anglo
11132 21131
4210114 Blue Sky
4210045 Anitech
11132 12121 12141
21131 11322
4210115 Blue Star
4210047 Ansonic
22413 21321 12323
4210118 Bondstec
11132 11322
4210119 Boots
22423 13314 22114
4210121 BPL
23234 21114
4210123 Brandt
14424 11141 23341
4210050 Apollo
24232
4210053 Arc en Ciel 23144 24422 12342
14121 31431
4210126 Brinkmann
22142 14123
4211030 Brionvega
4210054 Arcam
14231 23144 14232
4210128 Britannia
4210057 Aristona
11322 31341 11141
4210133 Bruns
1
2
3
4
Volume + = 1
Martin
13314 23211
12332 22233 12123
12331 12224
11322 12141
11132
14233 21131 14231
21233 14232
11322 14231 14143
21114 22111
11132
13314 23211
11322 12342 14232
22413 22212
21131 14233 23341
14232 22413 21131
12141
12224 14143 14342
12141 22242
14232 14424
11134 11321 11132
13242 22423
14343
31224
12342 14112 22224
13443 14111
12131 12132 14232
14211
& Olufsen*
31422 12224
22441 13314
14233 11132 22423
11322 13314
21233
14232
21344 31224 14114
31111 11322
31333 13444 22332
22242 24432
11133
14232
22413 11322
11322 23313
22212 22413 23322
11322 22413 22423
14232
14424
21233
21233
31333 13444 31224
14114 14131
14222 22124 24111
14233 21233 24124
11322 24324
21233
14424
14232
21233 11322
24422 12342 23144
14342 22142
14121 14123 21244
22144 31431
23313 11322 31124
11322 12224 22333
14231 14232
12224

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZAPPER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for One for All ZAPPER

  • Page 1 Programme(+). Important notes: - In order to avoid having to reprogram your ZAPPER after you remove If your device does not respond to the ZAPPER after you have tried the batteries, you will need to insert new batteries within 5 minutes.
  • Page 2 4210134 BSR 13314 21323 4210308 Forgestone 14112 4210415 ITT 13314 24311 22242 4210564 NEC 13333 11321 22111 4210682 Radialva 12342 14233 23344 4210854 Teac 11322 31111 24124 4230034 Alpha 33241 14131 4230379 Hirschmann 21244 22142 23142 4230676 Quadral 22333 31124 21311 22131 41421 4210138 BTC 14233...