Configuring The Settings Of Audio Output Signals (Sound) - Yamaha htr-4064 Owner's Manual

■
Test Tone
Turns the test tone generator on or off. When this setting is set to "On," the volume
balance settings for each speaker can be adjusted while listening to the output sound in
other speaker settings (such as "Level" or "Graphic EQ").
Settings
Off (Default) Does not generate test tones.
Generates test tones. While "On" is selected, test tones are produced
On
constantly.
Configuring the settings of audio output signals
(Sound)
Configuring the settings of audio output signals.
■
Lipsync
Adjusts the delay between audio and video output (Lipsync function).
❏ Auto
When connected to a TV via HDMI, automatically adjusts audio output timing if the TV
supports an automatic lipsync function. If necessary, fine adjustment of the audio output
timing is possible. The difference between the result of auto delay and the fine
adjustments is displayed to the right of "Offset."
Setting range
0 ms to 250 ms (1 ms increments)
Default setting
0 ms
❏ Manual
Manually adjusts the correction time.
Setting range
0 ms to 250 ms (1 ms increments)
Default setting
0 ms
64
En