Table of Contents
Advertisement
■
Extra Bass
Specifies a speaker to produce the front channel low-frequency components.
Settings
Depending on the size of the front speakers, either the front speakers or
Off (Default)
the subwoofer produce the front channel low-frequency components.
The subwoofer and the front speakers produce the front channel low-
On
frequency components.
• When "Front" is set to "Small," "Extra Bass" is automatically set to "Off."
■
Distance
Separately adjusts the timing at which each speaker produce audio so that sounds from
the speaker reach the listening position at the same time.
Submenu
Meter
Shows units of length in meters.
Feet
Shows units of length in feet.
• The default setting of units of length differs depending on your country or region.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft)
*In 0.05 m (0.2 ft) increments
Default setting
3.00 m (10.0 ft)
■
Level
Separately adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default setting
0.0 dB
■
Equalizer
Selects an equalizer type.
"YPAO:Flat," "YPAO:Front" and "YPAO:Natural" can be set after performing YPAO.
Settings
Through (Default)
Disables the equalizer.
Uses the graphic equalizer to adjust sound quality manually. For details,
Graphic EQ
refer to "Adjusting the graphic equalizer."
YPAO:Flat
Sets uniform characteristics for each speaker.
YPAO:Front
Sets the characteristics of each speaker to match the front speakers.
YPAO:Natural
Adjusts all speaker sound to give natural acoustics.
■
Adjusting the graphic equalizer
1
Select "Graphic EQ" in "Equalizer," and then press ENTER.
2
Press the cursor keys (
/
) to select a speaker to adjust, and then press ENTER.
3
Press the cursor keys (
/
) to select a frequency you want to adjust.
Choices
63 Hz/160 Hz/400 Hz/1.0 kHz/2.5 kHz/6.3 kHz/16.0 kHz
4
Press the cursor keys (
/
) to adjust the volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default setting
0.0 dB
• Repeat steps 3-4 to adjust the tone to your liking.
• Press RETURN or the cursor keys (
(step 2).
5
Use the cursor keys (
/
) and select "EXIT," and then press ENTER to finish
"Equalizer."
/
) repeatedly to return to select a speaker to be adjusted
63
En
Advertisement
Table of Contents
