Connecting A Tv - Yamaha htr-4064 Owner's Manual

1 2 3 4 5 6 7 8

Connecting a TV

3 Connecting a TV
Connect a TV to the unit. The video signals input to the unit are output to the TV.
TV audio can also be output from the unit. The recommended way to connect a TV
varies depending on types and functions of video input jacks on the TV.
Select how to connect the TV to the unit while referring to the TV manual.
Does you TV support
Audio Return Channel (ARC)?
No
Does you TV support
HDMI Control?
No
Does your TV have an
HDMI input jack?
No
■
Connection method 4 (p.20)
HDMI, component video, or composite video signal input to the unit is output from
the same type of output jack (p.86). Make necessary connections, and switch the
input source on TV depending on the playback device.
What is the HDMI control function?
By connecting a TV to the unit with an HDMI cable, some operations for the unit are
available with the TV's remote control, such as turning on/standby and volume
control. If playback devices that support the HDMI control function (BD/DVD
players, etc.) are connected to the unit, these are also acceptable. For more details,
refer to "HDMI Control" (p.87).
What is the Audio Return Channel (ARC)?
If your TV supports the ARC, TV audio can be output to the unit by using an HDMI
cable transmitting video signals from the unit to a TV.
Yes
■
Connection method 1 (on this page)
and
■
Connection method 4 (p.20)*
Yes
■
Connection method 2 (p.18)
and
■
Connection method 4 (p.20)*
Yes
■
Connection method 3 (p.19)
and
■
Connection method 4 (p.20)*
* Necessary if your playback device is connected to the
video input jacks other than HDMI1-4 jacks.
■
Connection method 1 (ARC-compatible TV)
Connect a TV to the unit with an HDMI cable.
• The following connections and steps are supplied, supposing that "HDMI" in the "Setup" menu has not been
changed from the default setting (p.69).
HDMI OUT jack
ARC
The unit (rear)
HDMI I
HDMI OUT
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1 HDM
ANTENNA
COMPONENT
VIDEO
AM FM
P R
75Ω
P B
VIDEO
Y
MONITOR OUT
MONITO
L
R
OPTICAL COAXIAL COAXIAL OPTICAL
AV
(CD) (TV)
OUT
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AUDIO
• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while
viewing the TV monitor (p.60).
• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you
also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog
video cable (p.20).
Necessary settings
To use the HDMI control function and ARC, the following settings are required in
advance.
1
After connecting external devices (TV, playback devices, etc.) and AC
power cable, turn on the unit, TV and playback devices.
HDMI input
ARC
HDMI HDMI
HDMI
TV
Continues to the
next page
16
En