Safety Devices; Emergency Shutdown Via Emergency Stop Switch; Safety Marking - Kersten HyCut Original Operating Instructions

HyCut Mower
2.7.1

Emergency shutdown via emergency stop switch

2.8

Safety marking

2021-01-27
Fig. : Emergency stop switch3
1 emergency stop switch Mower
2 Emergency Stop Switch Remote Control
There is an emergency stop switch on the top of the mower (1) and an emergency
stop switch on the remote control (2). In the event of an emergency, immediately
press the emergency stop switch of the mower (1) or the remote control (2).
• The HyCut mower remains standing
• The power supply to the motor controllers remains
• The internal combustion engine is switched off
• The knife drive is stopped
The following steps have to be implemented before you start again!
• Eliminate the cause of the error/ hazardous situation.
• Bring emergency stop switch back into output position.
The following icons and signs are located in the workspace. They refer to the
immediate environment in which they are located.
16 / 67
EN