Related Manuals for Lincoln industrial CENTRO-MATIC 84050
Summary of Contents for Lincoln industrial CENTRO-MATIC 84050
- Page 1 ® CENTRO-MATIC Model 84050 (Series “F”) Model 85243 (Caterpillar #178-6919) Model 85460 (Series “A”) Air Operated Pump - 142P - C8 Section 4.1A-68430-D01 June 2001 Form 403125 Page...
-
Page 2: Table Of Contents
® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 Table of Contents DESCRIPTION Page Safety................2 Specifications................2 General Description Description................2 The Models 84050, 85243 and 85460 are pumping units Pump Operation................2 designed to operate centralized lubrication systems. They Installing the Pump..............2 have a high volume output, delivering 30 cubic inches of Optional Devices................3 ®... -
Page 3: Optional Devices
® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 capable of at least 100 PSI operating pressure. In Case of Trouble OPTIONAL DEVICES (See Trouble Shooting Chart Page 7) • Use the Trouble Shooting Charts to determine where to Low Level Kit look if problems occur. - Page 4 ® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 of air cylinder then replace packing. the indicator nut (60). 6. Remove and replace the O-ring (61). 8. Remove packing assembly (31). If grease leakage is 7. Re-assemble in the reverse of the above procedure. Torque evident from side of air cylinder, then replace packing the indicator note (60 to 20 ft-lbs.
- Page 5 ® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 Connect to Air Solenoid Valve Connect to Pump Connect to Junction Connect to Vent Pipe Block 1/4” NPTF Vent Assembly (49) 1/4” NPTF Outlet Check Assembly(52) 3/4” 3/4” NPTF NPTF Vent Valve Assembly (10) 3/8”...
-
Page 6: Dimensions
® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 40° 20° 6 x .500” (12.7 mm) Dia. 19” (483 mm) 13.9” (353 mm) Bolt Circle Dia. Section D-D © Model 84050 shown 39 (Ref) 14 (Ref) Section B-B 31” 38 (Ref.) View A-A 15”... -
Page 7: Repair Parts List
® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 SERVICE PARTS Item Qty. Description Model Item Qty. Description Model 84050, 85243 84050, 85243 & 85460 & 85460 Tee (1/4”) 67102 Cover 241085 Union Adapter 66649 Elbow 249533 Air Coupler 247668 Bolt 50015 Air Hose 72060... -
Page 8: Troubleshooting
® CENTRO-MATIC PUMP, MODELS 84050, 85243 & 85460 MODEL 84050, 85243 & 85460 TROUBLESHOOTING Condition Possible Cause Corrective Action Pump does not operate. No air to pump. Turn on or connect air supply to pump. Airmotor or pump tube malfunction. Refer to pump service page.
Need help?
Do you have a question about the CENTRO-MATIC 84050 and is the answer not in the manual?
Questions and answers