Prior to installation
Drill a hole of 70 mm diameter through the wall with its outside
inclining lower slightly. Install a guard ring and then seal it with
gesso or putty.
As shown in the diagram at the right, open intake barrier . (AC092
122,162FEAHA, AC092
As shown in the diagram at the right, remove two screw snails as
shown and take right-side intake barrier down. (AC182,242,
282FEAHA,AC182,242,282FEBHA
Installation of Air Conditioner
Installation in under ceiling
1. Installation of suspending bolts
Installation of supporting frame for AC092,122,142,162FEAHA, AC092,122,142,162FEBHAtype
should be internally suspended.
Installation of supporting frame for AC182,242,282FEAHA,AC182,242,282FEBHA type should be
externally suspended.
Installation position of suspending bolts
Blot hole for installaiton
4-12x27
B
(Note: Here we only use simple drawing as figurations of the series are different)
Type
AC092,122,142,162FEAHA,
AC092,122,142,162FEBHA
AC182,242,282FEAHA,
AC182,242,282FEBHA
Type
AC092,122,142,162FEAHA,AC092,122,142,162FEBHA
AC182,242,282FEAHA, AC182,242,282FEBHA
,
122,162FEBHA)
.
Space length between supending bolts
A
A (mm) B (mm) C (mm)
990
1332
Hole through the wall
,
Internal suspension
External suspension
Installation mode
990
Internal suspension
1244
External suspension
D (mm) E (mm) F (mm)
655
710
3
70mm
Indoor side
outdoor side
Profile chart of hole through the wall
Space length between
B
suspending bolts
Space length between
C
suspending bolts
200
175
325
143
Depth of
the wall