Table of Contents
Advertisement
Maintenance
Clean the air filter
2.Dismantle the air filter
Pull the two side handles at the
back of the air inlet grille, lift the
air filter to dismantle it.
3. Clean
Do not use the hot water over 50* to clean to avoid discoloration or
deformation.
Do not dry the unit on fire, the filter may be burnt.
Use cleaner or water to clean to remove dust.
Use cleaner to remove dust.
*A*
4. Install air filter
(1)Put the air filter into those extruding parts at the top of the air inlet grille.
(2)Draw the handles at the back of the air inlet grille inwards to fix the air
filter.
5.Close air inlet grille
Referring to procedure 1.
Open and remove
Notice
When the dust is too much, use
*
*
B
soft brush and neutral detergent.
Throw the water off, then put it
*C*
in the shadow for airing.
15
Advertisement
Table of Contents
