Table of Contents
Advertisement
GUIDE TO OPERATION
Remote Control:
There is a telecommunication interface for remote control on the control panel of the indoor unit
After the peripheral equipment have been installed in accordance with the instruction manual o
the selected remote control detector, the air conditioner will be computerized and controlled from
far-away place.
Power Failure Compensation (to be applied for a necessary situation):
After the power failure compensation is set, if power failure suddenly occurs while the air condition
is working, it will resume the previous working state when the power is supplied again.
Setting Method: When the remote controller is on (excluding timer mode and fan mode),
Cancel Method: Press the "Sleeping" button on the remote controller 10 times within 5
Notes: When a power failure suddenly occurs during the air conditioner is working after the powe
failure compensation is set, if the air conditioner will not be used for a long time, please cut off t
power supply to prevent its operation from being resumed after the power is supplied again, or pre
the "Switch On/Off" button after the power comes again.
press the "Sleeping" button on the remote controller 10 times within 5
seconds, and after the buzzer rings 4 times, the air conditioner will ente
the state of power failure compensation.
seconds, and after the buzzer rings 2 timer, the power failure compensatio
mode will be cancelled.
17
Advertisement
Table of Contents
