Clearing Faults; Technical Data - EHEIM streamcontrol 3500 Operating Manual

English
7.

Clearing faults

Attention! Electrocution!
▶ Before clearing faults, remove the mains plug.
Faults
Control unit – LEDs do not
illuminate
Pump does not pump
For other faults, please contact EHEIM Service.
8. Decommissioning
Storage
Store the appliance in a dry and frost-proof place.
Disposal
When disposing of the appliance, heed the respective statutory regulations.
Information on the disposal of electrical and electronic appliances in the European Union:
Within the European Union, disposal of electrically operated appliances is governed by national
regulations that are based on the EU Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE). The appliance may no longer be disposed of with the municipal or house-
hold waste. The appliance will be accepted free of charge at municipal collection points or
recycling centres. The product packaging is made up of recyclable materials. Dispose of them
in an environmentally responsible manner and take them for recycling.
9.

Technical data

Art. No.
Load
Timer
Mains voltage/frequency
The technical data for other country variants can be found on the type plate.
Possible cause
No mains voltage
No mains voltage
3500210
13
Remedy
▶ Check the mains
voltage
▶ Check the supply line
▶ Insert the mains plug in the
two-outlet power strip.
max. 100 W per socket
1 – 60 minutes
220 – 240 V / 50 Hz
3500350