Advertisement
5. Attachment of washing brush
When attaching brush,
- switch off Power Washer
- turn off water supply
- set changeover nozzle
(4)
to
"CHEM"
- attach brush to spray wand.
...---
- The spray wand can be inserted into the gun
in
6
different positions.
~
~J
~
- Following removal of the spray wand
,
the
washing
brush can also be attached directly to
the
gun.
6. After use
-
Flush device after spraying cleaning agent.
-
Shut off water supply from faucet or,
in
the case of
suction operation, remove suction hose from
bucket.
-
Squeeze trigger of gun until no further water
emerges.
-
Release trigger and secure with catch.
-
Switch off Power Washer.
- Remove plug from socket.
Cleaning method
1. step:
Loosen dirt
-
Set cleaning-agent adjustment valve (14)
to accommodate the degree of soiling.
- Set
nozzle (4) to "CHEM"
and
apply
cleaning-agent solution .
- Allow
1-5
minutes for cleaning agent to
react.
- Only use
"max"
setting in the event of ex-
treme soiling, e.g. for cleaning sanitary
facilities and swimming-pools.
2. step: Remove dirt
:--
Wash
off
loosened dirt using high-pres-
sure.
Vehicle cleaning with Sears Power Washer 900.
1.
step:
Apply cleaning agent using low-pressure
jet (40°).
2. step:
Wash off using max. water volume and
high pressure jet
(15
°).
3. step:
Apply
drying
agent
- Drying
agent must be
applied without
pressure.
To do this spray wand
must be
removed from the gun.
Refer to page 2 for illustration reference numbers.
7
Advertisement
