Normal Operation - Telefunken TRC 200 Manual

Identifying codes found using the search procedure
1. Press and hold the Setup (19) key until the red indicator (13) lights continuously. Release the
Setup key.
2. Press the Mode key (2) for the equipment you want to identify (TV, DVD, SAT...). The red
indicator blinks once.
3. Press again Setup. The red indicator blinks once.
4. To identify the first digit press each number button from 0 – 9 (3) until the red indicator blinks.
The number you pressed is the first digit of the code.
5. Press each number key from 0 – 9 as above to find the second digit.
6. Press each number key from 0 – 9 as above to find the third digit.
7. Press each number key from 0 – 9 as above to find the fourth digit. When the fourth digit has
been found the red indicator will go off. Don't forget to write down the code.
Volume Control
In its delivered state, the universal remote control is programmed such that each mode will use
their own Volume and Mute functions if present.
Adjustment of ALL volume controls under a specific mode
You can program the remote control so that the volume and mute keys control a specific device
(the volume control must exist on the corresponding device). E.g. control of TV sound in
DVD Mode, SAT Mode, ....
1. Press and hold the Setup (19) key until the red indicator (13) lights continuously. Release the
Setup key.
2. Press and hold Mute (15) until the red indicator (13) blinks once. Release Mute.
3. Press once on the Mode key (TV or SAT or DVD or VCR or...) corresponding to the device
whose volume will always be controlled by the Vol+/Vol- (9) and Mute (15) keys.
4. Press the Mute (15) key once.
Adjustment of the volume controls for EACH mode
You can program the universal remote control in such a way that any mode will use only its own
volume and mute functions.
1. Press and hold the Setup (19) key until the red indicator (13) lights continously. Release the
Setup key.
2. Press and hold the Mute (15) key until the red indicator (13) blinks once. Release Mute.
3. Press once the Mode key (TV, DVD, SAT, ...) for the device that is only to have its own volume
and mute functions.
4. Press the VOL- keys (9). The red LED indicator blinks and remains lit.
5. Press the Mute (15) key again, and the red LED indicator will extinguish.
6. The Mode key chosen will now use its own Volume and Mute functions
Restoring the universal Volume/Mute functions
If you have changed the universal volume and mute functions, as described in the previous two
sections, you can reset the functions back to the factory settings:
1. Press and hold the Setup (19) key until the red indicator (13) lights continuously. Release the
Setup key.
2. Press and hold Mute (15) until the red indicator (13) blinks once. Release Mute.
3. Press and release the Mute key (15). The red indicator (13) will turn off. The volume and mute
functions are now restored to their factory defaults.

Normal operation

After having programmed your remote control for your audio/video devices, your remote control
will in respect of the most common main functions work like the original remote control of the
respective device.
Point your remote control at the respective device and press the appropriate MODE key. All
functions will now be activated by pressing the respective function key of your remote control.
For each transmitted IR signal, the red indicator lights up and blinks rapidly.
Learning function (only TRC 800, item no. 55414)
If the make of the device you wish to control is not in the separate code list or if some functions are
missing in the code you have programmed, you can copy the key functions of the original remote
control of the device into your remote control. Depending on the format of the transmission
codes of the original remote control, your remote control can memorise up to 150 keys.
15