HTC EVO Design 4G User Manual page 16


Replace the battery compartment cover.
2. Charge your battery.

Plug one end of the USB cable to the AC adapter.

Plug the other end of the USB cable into the charger/accessory jack on the lower left
side of your device.

Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours.
Note: Your device's battery should have enough charge for the device to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
3. Press

If your device is activated, it will turn on, search for Sprint service, and begin the
setup application.

If your device is not yet activated, see
Get Started
to turn the device on.
Activate Your Device
4
for more information.