Checking Audio Functions On The Slate - HP Slate 500 User Manual

Checking audio functions on the Slate

To check the audio functions on your Slate, follow these steps:
1. Tap Start > Control Panel.
2. Tap Hardware and Sound, and then tap Sound.
3. When the Sound window opens, tap the Sounds tab. Under Program Events, tap any sound
event, such as a beep or alarm, and then tap the Test button.
You should hear sound through the speakers or through connected headphones.
To check the record functions of the Slate, follow these steps:
1. Tap Start > All Programs > Accessories > Sound Recorder.
2. Tap Start Recording and speak into the microphone. Save the file to your desktop.
3. Open a multimedia program and play back the sound.
NOTE: For best results when recording, speak directly into the microphone and record sound in a
setting free of background noise.
To confirm or change the audio settings:
1. Tap Start > Control Panel.
2. Tap Hardware and Sound, and then tap Sound.
26 Chapter 4 Multimedia