Specifications; Specific Safety Rules - Makita BDA340 Instruction Manual

ENGLISH
1-1. Button
1-2. Red part
1-3. Battery cartridge
2-1. Switch trigger

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
EC-DECLARATION OF CONFORMITY
Model; BDA340, BDA350
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014
Directives, 2004/108/EC, 98/37/EC.
000230
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Explanation of general view
3-1. Lamp
4-1. Reversing switch
6-1. Chuck key
7-1. Chuck key holder
Model
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
) : 73 dB(A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
in accordance with Council
CE2007
Director
BDA340
10 mm
25 mm
0 - 1,700
314 mm
1.5 kg
D.C. 14.4 V
ENE032-1
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

SPECIFIC SAFETY RULES

ENG101-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
ENG202-1
its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
sum)
the operator.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
ENH102-7
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool
only when hand-held.
6. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
7. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
3
7-2. Screw
8-1. Groove
8-2. Hook
8-3. Screw
BDA350
10 mm
25 mm
0 - 1,800
314 mm
1.6 kg
D.C. 18 V
GEB002-2