1. Manuals
  2. Brands
  3. EMX Manuals
  4. Keypad
  5. KPX-100
  6. Instruction manual

EMX KPX-100 Instruction Manual

Programmable keypad.
Hide thumbs Also See for KPX-100:
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
The KPX-100 is a dual relay output, programmable keypad. It features a durable metal housing
and
metal
backlit
Connect this keypad to door strike controls, security systems or automatic gate and door operators.
The KPX-100 easily mounts on gooseneck stands, posts or walls.
Specifications
Power
Standby Current
Detection Current
Environmental Rating
Operating Temperature
Housing Material
Dimensions (L x W x H)
Indicators
Status
Programming Mode
Successful Key Entry Relay 1
Successful Key Entry Relay 2
Unsuccessful Key Entry
Successful Code Entry
Unsuccessful Code Entry
DAP Jumper Not Replaced
Standby Mode
Lock-Up Mode
EMX Industries, Inc.
Document No.10579100 Rev 2.5
KPX-100
™
Programmable Keypad
keys
designed
for
12-24 VDC/AC
16 mA
78 mA
IP66
-4º to 158ºF (-20º to 70ºC) 5 to 95% relative humidity
Powder coated steel with stainless steel faceplate
6.14" (156 mm) x 4.1" (103 mm) x 2.76" (50 mm)
Tones
---
Determined by
code 81
Determined by
code 81
5 beeps
2 beeps
5 beeps
Continuous
beeps
---
5 beeps
Tech support: 216-518-9889
technical@emxinc.com
high
traffic
areas
Left LED
Orange LED
---
---
Solid red LED
---
---
---
---
Flashes continuously
1 flash every
---
1 flash every
On
and
harsh
environments.
Right LED
Flashes
Solid green
1 flash
1 flash
3 flashes
2 flashes
5 flashes
2 seconds
Solid red LED
2 seconds
TM
---
LED
---
---
---
---
---
---
1/9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPX-100 and is the answer not in the manual?

Questions and answers

Related Manuals for EMX KPX-100

Summary of Contents for EMX KPX-100

  • Page 1 KPX-100 ™ Programmable Keypad Instruction Manual The KPX-100 is a dual relay output, programmable keypad. It features a durable metal housing metal backlit keys designed high traffic areas harsh environments. Connect this keypad to door strike controls, security systems or automatic gate and door operators.

  • Page 2: Wiring Connections

    N.C. (normally closed) contact while the keypad is secured in the housing. It opens when the keypad is separated from the housing. To prevent tampering connect this N.C. terminal to an alarm. See wiring diagram to the right. EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...

  • Page 3: Wiring Diagrams

     Connect door position sensor terminal (13) to ground if not in use. Inter-Lock Wiring  This inter-lock system uses two KPX-100 with cross wire connections on the output 1 inhibit (14) and inter-lock control output (15) terminals.  Connect the common ground terminals (12) of the two keypads.

  • Page 4: Installation

    Code 4 1 / 5 1 will change the output to toggle mode – the door will remain unlocked until a code is re-entered. To exit programming mode press… EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...

  • Page 5: Programming Options

    Start/Stop Mode: Keeps OUTPUT 2 triggered until re-entry of user Output 2 key. Note: Output 2 may be used as a supervisor mode to disable Output 1 if wired in series. EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...
  • Page 6 Orange LED flashes during system standby. (default) Door Propped Open Alarm No alarm for a propped open door. Alarm sounds for a propped open door after the specified time (1-999 1-999 # seconds). EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...

  • Page 7: Troubleshooting

    5. The keypad is now in programming mode and the programming key is now 0000. (This does not affect stored data, only the programming key is forgotten.) Mounting the Keypad Steel box Plastic inner box Faceplate EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...

  • Page 8: Warranty

    User Codes and Location Record Code Code Warranty EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...
  • Page 9 EMX Industries, Inc. products have a warranty against defects in materials and workmanship for a period of two years from date of sale to our customer. EMX Industries, Inc. Tech support: 216-518-9889 Document No.10579100 Rev 2.5 technical@emxinc.com...

Table of Contents