Page 1
KPX-100 ™ Programmable Keypad Instruction Manual The KPX-100 is a dual relay output, programmable keypad. It features a durable metal housing metal backlit keys designed high traffic areas harsh environments. Connect this keypad to door strike controls, security systems or automatic gate and door operators.
N.C. (normally closed) contact while the keypad is secured in the housing. It opens when the keypad is separated from the housing. To prevent tampering connect this N.C. terminal to an alarm. See wiring diagram to the right. EMX Industries, Inc. Tech support: 216-834-0761 KPX-100_Rev2.0_090519 technical@emxinc.com...
• Connect door position sensor terminal (13) to ground if not in use. Inter-Lock Wiring • This inter-lock system uses two KPX-100 with cross wire connections on the output 1 inhibit (14) and inter-lock control output (15) terminals. • Connect the common ground terminals (12) of the two keypads.
You must enter programming mode to enter any codes or add any user keys. • Multi-User Single-User The KPX-100 is factory set to multi-user To enter single user mode press… mode. To enter Multi-user mode press… To change the programming key, press 0 and...
#. OUTPUT 1 closes when entire user key is entered. Start/Stop Mode: Opens OUTPUT 1 with first three digits of user key Output # followed by #. OUTPUT 1 closes when entire user key is entered. EMX Industries, Inc. Tech support: 216-834-0761 KPX-100_Rev2.0_090519 technical@emxinc.com...
Keypad does not require # after user key is entered. All user keys must match Programming key length. Keypad requires # after user key is entered. (default) Keystroke Tones Keystrokes are silenced. Keypad beeps on every keystroke. (default) EMX Industries, Inc. Tech support: 216-834-0761 KPX-100_Rev2.0_090519 technical@emxinc.com...
1 activates. Press and hold the egress button for 10 seconds, the keypad will beep before output 1 activates. Mounting the Keypad Steel box Plastic inner box Faceplate EMX Industries, Inc. Tech support: 216-834-0761 KPX-100_Rev2.0_090519 technical@emxinc.com...
(This does not affect stored data, only the programming key is forgotten.) Warranty EMX Industries, Inc. products have a warranty against defects in materials and workmanship for a period of two years from date of sale to our customer. EMX Industries, Inc.
Need help?
Do you have a question about the KPX-100 and is the answer not in the manual?
Questions and answers