Compaq iPAQ PCD-1 User Manual page 11

1
Audio Out - Allows you to plug your PCD-1 into your home
stereo system (cable not supplied).
2
Earphone Connection - Plug in your headphones here to
listen to CDs (headphones supplied).
WARNING: Permanent hearing loss may occur if
headphones are used at high volume.
3
Power button - Press to turn the PCD-1 on. Hold for two
seconds to turn the PCD-1 off.
4
Norm/Hold Switch - The Norm/Hold switch should be in the
Norm position for typical usage. When the switch is in the
Hold position, the front panel buttons are disabled. In the
Hold position, you can carry your PCD-1 in a pouch or purse
and not worry about accidentally pushing the buttons.
Tip: You must set the Norm/Hold switch to the
Normal position to turn on the PCD-1. A "Hold is
on!" message is displayed on the screen if the
switch is in the Hold position when you press the
Power button. After displaying the message, the
PCD-1 shuts off.
5
Power Supply Connection - Plug in your AC power adapter
here to run the PCD-1 from a standard electrical outlet.
Note: Turn off your PCD-1 before connecting it to AC power.
C PAQ PCD-1
OMPAQ I
9