Compaq iPAQ H3700 Series Getting Started Manual page 51

GS 5x3.book Page 47 Wednesday, September 5, 2001 1:28 PM
Pocket PC H3700 Series or for an
AC power accessory intended for
use with your device, you should
purchase a power cord that is
approved for use in your country.
The power cord must be rated for
the product and for the voltage and
current marked on the product's
electrical ratings label. The voltage
and current rating of the cord
should be greater than the voltage
and current rating marked on the
product. In addition, the diameter
of the wire must be a minimum of
0.75 mm /18AWG, and the length
2
of the cord must be between 5 feet
(1.5 m) and 6.5 feet (2 m). If you
have questions about the type of
power cord to use, contact your
Compaq authorized service pro-
vider.
47
A power cord should be routed so outlet.
Do not place anything on power
that it is not likely to be walked on
cords or cables. Arrange them
or pinched by items placed upon it
so that no one may accidentally
or against it. Particular attention
step on or trip over them.
should be paid to the plug, electri-
Do not pull on a cord or cable.
cal outlet, and the point where the
When unplugging from the
cord exits from the product.
electrical outlet, grasp the cord
by the plug.
WARNING: To reduce the risk
of personal injury, electric
WARNING: To reduce the risk
shock, fire, or damage to the
of electrical shock, fire, or dam-
equipment:
age to the equipment:
Do not disable the power cord
Do not use converter kits sold
grounding plug. The grounding
for appliances to power the
plug is an important safety fea-
computer.
ture.
Plug the equipment into a
grounded (earthed) electrical
outlet that is easily accessible
at all times.
Disconnect power from the
equipment by unplugging the
power cord from the electrical