Compaq iPAQ H3700 Series Getting Started Manual page 14

GS 5x3.book Page 10 Wednesday, September 5, 2001 1:28 PM
4 Select the backlight settings
On the Battery Power tab,
select when to use the backlight
on battery power
On the External Power tab,
select when to use the backlight
on external power
On the Brightness tab, select
the level of brightness for the
backlight
Hint: Slide the bar to the lowest
level to conserve the most
power
10
Always keep the Compaq iPAQ
Tips
Pocket PC connected to a cradle or
AC adapter when you are not using
I cannot see anything on the
it
screen
In the backlight settings slide the
1 Make sure the screen is on
bar to the lowest level to conserve
the most power
Press the power button
2 Make sure the Compaq iPAQ
I do not see the charge light
Pocket PC is connected to
blinking when my Compaq
the AC adapter and the cra-
iPAQ Pocket PC is connected to
dle
the cradle
Plug the AC adapter into an
1 Make sure the cradle is
outlet
plugged into an outlet
Insert the DC adapter plug into
2 Make sure the bottom of your
the cradle
Compaq iPAQ Pocket PC is
pushed firmly into the cradle
I cannot keep my battery
charged