Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-15
ERROR: The value is too large
Viewing the Stack Configuration
The Stack Configuration screen shows the unit number, backplane number,
backplane type, managed status, and unit description. You can change only the
backplane number (1, 2, 3, or Isolated). When you make a change, the change
becomes effective immediately.
Figure 4-4. Stack Configuration Screen
The Managed Status field indicates the status of the repeater's hardware
management override switch setting (see "Appendix B: Internal DIP Switch").
If the field reads Yes, the switch is at its default (no management override)
setting.
Netelligent 3512/3612 100Base-T Repeater User Guide
Advertisement
Table of Contents
