Husqvarna WDC 220 Operator's Manual page 13

Never spray water on to the
•
upper section of the vacuum-
cleaner.
WARNING: Electric shock
due to faulty mains
connecting lead.
Touching a faulty mains
connecting lead can
result in serious or even
fatal injuries.
Do not damage the mains
•
power lead (for example by
driving over it, pulling or
crushing it).
Regularly check whether the
•
power cord is damaged or
shows signs of ageing.
If the electric cable is
•
damaged, it must be replaced
by an authorized Husqvarna
distributor or similar qualified
person in order to avoid a
hazard.
In no circumstances should
•
the power supply cord be
wrapped around fingers or any
part of the operator's body.
CAUTION: The appliance
socket (only on some
models) is only designed
for the purposes defined
in the operating
instructions. The
connection of different
562 - 002 - 27.06.2018
appliances can result in
damage.
Prior to plugging in an
•
appliance, always stop the
product and the appliance that
is to be connected.
Read the operating
•
instructions to the appliance to
be connected and observe the
safety notes contained in
these.
CAUTION: Damage due
to unsuitable mains
voltage. The appliance
can be damaged as a
result of being connected
to an unsuitable mains
voltage.
Make sure that the mains
•
voltage and the mains
frequency of the power supply
match the data on the rating
plate of the wet/dry vacuum
cleaner.
Safety instructions for operation
To clean liquids
CAUTION: Do not clean flammable liquids.
• Remove the filter bag before you start to clean
liquids. Do a check that the float or the water level
limit function correctly.
• Use a special filter element or filter screen.
• If foam comes from the product, stop the work
immediately and empty the tank.
13