Cradle Components
Keyboard Components
The keyboard is a convenient, portable input device for your Pocket PC. The
keyboard does not require batteries and uses a very small amount of power
supplied by the device. Note that you must first enable the keyboard before you
can use it.
To enable the keyboard:
1. Tap Start > Settings > System > iPAQ keyboard.
2. Select the Enable Keyboard check box.
To connect the keyboard to your iPAQ Pocket PC:
1. Line up the guides on the bottom of the keyboard with the holes on the
bottom of the Pocket PC.
2. Slide the Pocket PC into the keyboard until it is firmly seated.
1
Pocket PC compartment
2
Spare battery compartment
3
AC adapter connector
4
Spare battery LED indicator
1
Microphone
2
Green (answer / send) key
3
Red phone (hang up / end) key
4
Inbox key
5
Contacts key
Section 1, page 12