Safety Notice - Cybertronix SENTINEL EFI-MLZ User Manual

Sentinel™ EFI-MLZ

1. SAFETY NOTICE

Review the following safety precautions to avoid serious injury or death and to prevent damage to
this product or any products connected to it. To avoid potential hazards, use this product only as
specified. This equipment contains high voltages. Electrical shock can cause serious or fatal injury.
PRECAUTIONS
!
WARNING: Under certain fault conditions, high voltages can be conducted into the
earth fault indicator enclosure through the CT, remote indicator, or the auxiliary relay cables.
All parts within the enclosure should be handled as if carrying dangerous voltages.
WARNING: Use extreme caution during the installation and use of the earth fault
indicator as high voltages and currents may be present in the circuit.
• Ensure that the current sensor is installed at earth potential on the HV cable system.
• Ensure that the current sensor is installed on the screened part of the cable system.
• Use caution during the installation and use of this product; high voltages and currents
may be present in the circuit.
• This product must be used only by qualified personnel practicing applicable safety
precautions.
• Wear protective clothing and gloves as required.
• Do not install this product on live conductors.
• Always de-energize circuit before installing the current sensor and indicating unit.
• Always inspect the current sensor, indicating unit and all leads for damage before using
the product.
• Do not use the product if damaged.
Version 4.1
User's Manual
Page 3 of 15